RGT-MB Modified Bitumen Waterproof Tape, which also be called Flash Band or Flash Tape, is a self-adhesive polymer modified bitumen adhesive tape backed with a durable material that creates a watertight seal on almost any surface. It is ready to use and ideal for sealing and repairing of metal sheeting, water tanks, pipes and gutters. It is supplied in rolls that are interleaved with a disposable release film.

Features and Benefits

·Good sealing property.

·Excellent waterproof performance. The adhesive strength of the product is greater than the strength of the material itself, and can be closely combined with the attachment, never detached, which forms a waterproof integrity.

·Great sticky. It can be bonded to most materials, including metal, plastic or brick, to ensure the adaptability and flexibility of use.

·Long service life. It has high temperature resistance, low temperature resistance, strong UV resistance and corrosion resistance.

·Easy to use.

Application Range

·Roofs – around chimneys and skylights, over joints/ cracks in tiles and roof cladding.

·Exterior walls – joints and cracks in asbestos cement sheeting, cracks under masonry ties and anchorages, around wall penetrations (such as water pipes), gutters and down pipes.

·Terraces – at joints between terraces and exterior walls, joints in parapets, roof edges, sides, flashing and joints. 

·Inside the house – leaking pipes, showers etc.

Installing Guideline

·The surfaces to be sealed must be dry, capable of bearing load and free from grease and dust.Remove all loose dust and dirt with a wire brush and soft broom from the area of application.

·Unroll and cut Bitumen Aluminium Flashing Tape to the required length.

·Peel the backing strip and apply the adhesive side onto the prepared substrate. 

·Smooth down using a roller or gentle fingertip pressure to prevent air pockets and creases, and to ensure a good tight seal.It is very important to press down the edges and ends of the tape.